YOKOGAWA L9866AK GC8000 L9866AK Taper tube in stock

YOKOGAWA L9866AK  GC8000  L9866AK Taper tube  in stock  for gas sample, 1.1 l/min)

● Reduced Wiring Costs
The analyzer bus system eliminates the need forwiring between the individual field analyzers and theassociated devices, such as a DCS or other host
computers, and a PC for analyzer maintenance.Ethernet allows hubs and other general networkingequipment to be used.

● Network Scalability
Ethernet facilitates connection to your network,thereby enabling remote monitoring. (To ensure thesafety of your network, firewalls or other networksecurity measures should be taken as appropriate.)

● High-Speed Network
Fast Ethernet supports data transfer rates of 100Mbps, providing real-time monitoring of not onlymeasured values and alarm information but alsochromatograms.

● Optical Communication
The analyzer is available with either shielded twistedpair wire or optical fiber. The optical fiber can beadvantageously used in long distance networks and
electrically noisy environments.

or switching valve, Hastelloy CWhen securing and removing the nuts, do not apply any load to the ceramic plate on which the(a) HubSwitching type 100Base hub is recommended.example; 

MOXA made P/N:EDS-308-MM-SC(multi mode, wave length 1310 nm100Base-FX (SC connector) 2 ports,TP 

(RJ45) 6 ports)(Area classification: class 1 Div 2/Zone 2)(b) Cable

• Optical Fiber Cable
It is recommended to use optical fiber cable whenextending distance, wiring between separatebuildings or using the device in electrically noisyenvironments.Optical fiber cable does not require a “Signalinterrupter” for explosion proof.

The type of optical fiber is the multi mode which corediameter is 50/125 mm or 62.5/125 mm

Leave a message for product

Title

Contact

Tel

Content

Verify Code

Click to change

Note：1. Shortcut key for send message :Alt+s or Ctrl+Enter!
2. If necessary, please leave your detail contact!